top of page

3D Printing

-In addition to the for-sale items seen in the shop, we offer 3D printing services and consultations.  

-If you are interested in utilizing this service, fill out the request/inquiry form below that corresponds to the type of printing you want to use for your project (FDM or DLP).

-We will get back to you as quickly as possible to answer your questions and provide you with a quote!



FDM, or "Fused Deposition Modeling", is a style of printing where solid material is melted down, extruded, and dried, layer by layer until a finished part is created. This is the most commonly used form of 3D printing, and is typically what you will have seen if someone shows you a part they have 3D printed.

Our Available Materials:

  • PLA Plastic (Polyactic Acid) - Most Common/Easy to Print

  • ABS (Acrylonitrile Butadiene Styrene)

  • Other materials available per request.

Our Manufacturing Specifications:

  • Maximum print volume = 9.84 x 8.3 x 8.3 in (25 x 21 x 21 cm)

  • General Printing Tolerance = 0.008" (0.2mm)

DLP, or "Direct Light Processing", projects ultraviolet light into liquid resin, quickly curing it layer by layer. The result is a finished product of hardened resin, which is cleaned and set under additional UV light for final curing. DLP printing generally allows for more complex, and higher quality prints but can be more costly. 

Our Available Materials:

  • Contact for more details, as resin color and strength will vary depending on our stock. Special resins can be ordered by request.

Our Manufacturing Specifications:

  • Maximum print volume = 4.52 x 2.56 x 6.1" (115x65x155mm)

  • General printing tolerance = 0.008" (0.2mm)

bottom of page